|
机械 中英
电气系统操作说明
Operating description of electrical system
使用者应按照以下步骤进行操作:
The user shall operate the equipment in accordance with following procedures:
1. 在通电前应检查液位和油位是否按要求加注至正常位置;
1. Before switching on the power, inspect if the liquid and oil level are filled to the normal level as required;
2. 合上柜内所有空气开关,关上柜门;
2. Close all air switches in the cabinet and close the cabinet door;
3. 松开按扭站上急停按扭SB3,合上电柜总电源空气开关QF0,电源指示亮;
3. Release the emergency stop button SB3 in the button station, close the air switch QF0 of the main power in the cabinet, the power indication lamp will be lit;
4. 在无报警的情况下,按下按扭站上“油泵启动” 按扭,主辅油泵运行;油泵指示灯亮;
4. On the condition that there is no alarm, press the “Oil Pump Startup” button in the button station, both main and auxiliary pumps start to run and the indication lamp of the oil pump is lit;
5. 操作按扭站上的选择开关SA1,选择相应的功能。www.en-ch.com
5. Press the selection switch SA1 in the operation button station to select the appropriate function.
技术参数
Technical parameters
1)油缸:Φ80XΦ40X600mm
1) Oil cylinder: Φ80XΦ40X600mm
2)进出口尺寸M27X2
2) Size of inlet and outlet: M27X2
3)油泵工作压力=11MPa,额定拉力=40KN
3) Working pressure of oil pump = 11MPa, rated pulling force = 40KN
4)主油泵电机功率=5.5KW(1440rpm)
4) Motor power for main oil pump = 5.5 KW (1440rpm)
5)电机控制电压:415V/50HZ
5) Control voltage of motor: 415V/50HZ
6)电磁阀控制电压:220V
6) Control voltage of solenoid valve: 220V
7)油箱有效容积:130L
7) Storage volume of oil tank: 130L
|